Magnesium Alloy Bar Suppliers Wholesale Dissolvable Magnesium Alloy Rod
Introduction:
A kind of degradable magnesium alloy material, which is widely used in the field of underground tools for oil extraction. It is made of soluble magnesium alloy. The tool is ablated after the completion of the work task and then mixed in the liquid, Can be completely degraded, there is no easy card astringent, blocking the channel problem, thus eliminating the need for drilling recovery process, reduce the project difficulty, improve the construction efficiency.
High specific strength, elastic modulus, good heat dissipation and eliminate shock resistance to withstand the shock load capacity than aluminum,organic matter and alkali resistance and good corrosion. Mainly used in aviation, aerospace, transportation, chemical, rockets and other industrial sectors. In the utility magnesium is the lightest metal and the proportion of magnesium is about 2/3 of aluminum, iron 1/4. It is the lightest metal in practical metal, high strength, high rigidity.
Parameter:
| | |
| | 300mm or as customer's required |
| | 900.0mm or as customer's required |
| | 2000mm or as customer's required |
| | 1000*2000mm,1219*2438mm,1219*3048mm,or as customer's required |
| | Carving,aerospace,auto,concrete tools,3C(cell phone/camera/compute),water heater,refrigerator,gas pipelines etc. |
| | 1.Good resistance to deformation force |
| |
3.Good absorption of vibration energy performance |
4.Good impact energy absorption characteristics |
5.Low melting, small specific heat |
| | Ordinary industrial surface,or customized |
| | |
| catalog | 1.Round bar |
| 1)Hot rolled black bar: (5-400)x6000mm or according to your requirement. |
| 2)Acid round bar: (5-400)x6000mm or according to your requirement. |
| 3)Cold drawn bright bar: (1-20)x6000mm or according to your requirement. |
| 4)Polishing round bar: (5-400)x6000mm or according to your requests. |
| 2.Angle bar |
| 1)Hot rolled angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests |
| 2)Acid angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests. |
| 3)Cold drawn angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests. |
| 3. Flat bar |
| 1)Hot rolled flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. |
| 2)Cold drawn flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. |
| 4. Channel bar |
| 1)Hot rolled channel bar: (5-100)x6000mm or according to your requests. |
| 2)Acid channel bar: (5-100)x6000mm or according to your requests. |
| 3)Cold drawn channel bar: (1-20)x6000mm or according to your requests |
| 5.Hexagon bar |
| 1)Hot rolled hexagon bar: (5-100)x6000mm or according to your requests. |
| 2) Acid hexagon bar: (5-100)x6000mm or according to your requests. |
| 3)Cold drawn hexagon bar: (1-20)x6000mm or according to your requests t. |
| 4)Polishing hexagon bar: (5-100)x6000mm or according to your requests. |
| 6. H Steel bar |
| 1)Hot rolled H bar: (5-100)x6000mm or according to your requests. |
| 2)Acid H bar: (5-100)x6000mm or according to your requests. |
| 3)Cold drawn H bar: (1-20)x6000mm or according to your requests. |
| 7. Square bar |
| 1)Hot rolled black bar: (5*5-400*400)x6000mm or according to your requests. |
| 2)Acid square bar: (5*5-400*400)x6000mm or according to your requests. |
| 3)Cold drawn square bar: (1*1-20*20)x6000mm or according to your requests. |
| 4)Polishing square bar: (5*5-400*400)x6000mm or according to your requests |
Feature of Magnesium Rods:
- Good ductility and corrosion resistance,
- High electrical and thermal conductivity,
- Good room temperature strength at room temperature
- Suitable for round, flat and square bars, pipes, plates and forgings
Size of magnesium alloy rod:
Type: AZ31B, ZK61M, AZ80A, AZ91D, M2M, ME20M, AZ40
Specification: Casting round bar billet(Φ3-160*3000)
Physical Propertiy:
Density: 1.8
Coefficient of thermal expansion: 26.8 x 10-6K-1
Specific heat: 1040 Jkg-1k-1
Thermal conductivity: 76.9Wm-1k-1
Electrical resistivity: 92nΩm
Modulus of elasticity: 45 x 109Pa
Poissons ratio: 0.35
Melting range: 566 - 632°C.
Standard:ASTM B843-1995,GB/T21448-2008,GB/T17731-2009
Production-Quality Control
Quality Control in our foundry begins on the foundry floor, where the first line of inspection is the casting and molding crew, our lab technicians inspectors and managers completes the quality team. Our quality control staff carefully monitors raw material, core materials,packaging and all aspects of production.
Product Tags:
|
|
Dissolvable Magnesium Alloys Rod Bar 300mm Semi Casting Images
|
